Filters Sort results
Reset Apply
Image | Name | Dims | Price | Quantity | Add to cart |
|---|---|---|---|---|---|
 | 64 × 64 × 79 in | $1,399.99 | | ||
 | 72 × 72 × 94 in | $1,649.99 | | ||
| | 95 × 95 × 92 in | $1,932.99 | | ||
| | 95 × 95 × 109 in | $2,236.99 | |
Built for Clean, Reliable Water Storage
Every tank is rotomolded in one seamless piece, so there are no seams or welds to leak.
Algae-Resistant Black
The opaque black wall blocks sunlight from entering the tank, which keeps algae from growing.
Potable-Ready Resin
FDA-compliant HDPE with NSF/ANSI 61 certified resin, suitable for drinking water storage.
Fill Full, Drain Fully
The inlet sits at the top and an air bleed helps the tank fill completely. The outlet sits at the bottom for full drainage.
Tough Tank Top
Large radii and thicker walls at the top help prevent collapsing in the sun.
Two 16" Manway Lids
Dual access points make top-down plumbing, filtered catchment and inspection easier.
Gallon Indicators
Molded-in volume markers let you check your water level at a glance.
Tank Sizes
| Capacity | Diameter | Height | Fittings |
|---|---|---|---|
| 1,000 gallons | 64" | 79" | 1.5" inlet, 2" outlet |
| 1,500 gallons | 72" | 94" | 1.5" inlet, 2" outlet |
| 2,500 gallons | 95" | 92" | 1.5" inlet, 2" outlet |
| 3,000 gallons | 95" | 109" | 1.5" inlet, 2" outlet |
Rainwater sizing tip: every inch of rain on 1,000 square feet of roof collects about 620 gallons. A 2,000 sq ft roof can fill a 1,000 gallon tank in less than one inch of rain.
Frequently Asked Questions
Can I store drinking water in these tanks?
Yes. The tanks are made from FDA-compliant HDPE with NSF/ANSI 61 certified resin. For a complete drinking water system, also use potable-rated fittings and plumbing, and follow any local codes.
Can I connect more than one tank?
Yes. Tanks can be plumbed together through their fittings to increase total storage. Call us and we can help you plan fittings and connections.
Do I need a special base?
Set the tank on a flat, level, smooth pad that supports the entire bottom, such as concrete or compacted fine gravel. In high-wind areas, use the molded tie-down locations to secure it.
Can these tanks be buried?
No. These are above-ground tanks and are not built to handle soil pressure.
How long do they take to ship?
Water tanks are made to order and typically ship in about 3 to 4 weeks, by freight from the manufacturer.
Need a tank for chemicals or fertilizer instead?
Water tanks are rated 1.0 SG. For heavier liquids, see our 1.5 and 1.9 SG chemical tanks in the same sizes.
What's the warranty?
5 years from purchase, extended to 10 years if you register the tank with the manufacturer within 30 days. Read the full warranty.
Planning a Water Storage System?
Tell us how much water you need and where it's going. We'll help you choose the right size and quote freight to your location.